Evaluation of a platinum electrode modified with hydroxyapatite in the lead(II) determination in a square wave voltammetric procedure

The behavior of a modified carbon platinum electrode (Pt) for lead(II) determination by square wave voltammetry (SWV) was studied. The modified electrode is obtained by electrodeposition of hydroxyapatite (HAP) on the surface of a bare platinum electrode. The new electrode (HAP/Pt) revealed interesting electroanalytical detection of lead(II) based on the adsorption of this metal onto hydroxyapatite under open circuit conditions. After optimization of the experimental and voltammetric conditions, the best voltammetric responses-current intensity and voltammetric profile were obtained in 0.2 mol L^?1 KNO₃ with: 30 min accumulation time, 5 mV pulse amplitude and 1 mV s^?1 scan rate. The observed detection (DL, 3σ) and quantification (DL, 10σ) limits in pure water were 2.01 × 10^?8 and 6.7 × 10^?7 mol L^?1, respectively. The reproducibility of the proposed method was determined from five different measurements in a solution containing 2.2 × 10^?6 mol L^?1 lead(II) with a coefficients of variation of 2.08%.The electrochemical of hydroxyapatite at platinum surfaces was characterized, after calcinations 900 °C, by X-ray diffraction, infrared spectroscopy, chemical and electrochemical analysis.     

Relative contributions of porosity and mineralized matrix properties to the bulk axial ultrasonic wave velocity in human cortical bone

Velocity of ultrasound waves has proved to be a useful indicator of bone biomechanical competence. A detailed understanding of the dependence of ultrasound parameters such as velocity on bone characteristics is a key to the development of bone quantitative ultrasound (QUS). The objective of this study is to investigate the relative contributions of porosity and mineralized matrix properties to the bulk compressional wave velocity (BCV) along the long bone axis. Cross-sectional slabs from the diaphysis of four human femurs were included in the study. Seven regions of interest (ROIs) were selected in each slab. BCV was measured in through-transmission at 5 MHz. Impedance of the mineralized matrix (Z_m) and porosity (Por) were obtained from 50 MHz scanning acoustic microscopy. Por and Z_m had comparable effects on BCV along the bone axis (R = −0.57 and R = 0.72, respectively).     

Scattering matrices of Lamb waves at irregular surface and void defects

Time-harmonic solution of Lamb wave scattering in a plane-strain waveguide with irregular thickness is investigated based on stair-step discretization and stepwise mode matching. The transfer relations of the transmission matrices and reflection matrices are derived in both directions of the waveguide. With these, an explicit expression of the scattering matrix is derived. When the scattering region of an inner irregular defect is geometrically divided into several parts composed of sub-waveguides with variable thicknesses and void regions with vertical free edges corresponding to the plate surfaces, the scattering matrix of the whole region could then be derived by modal matching along the artificial boundaries, as explicit functions of all the scattering matrices of the sub-waveguides and reflection matrices of the free edges. The effectiveness of the formulation is examined by numerical examples; the calculated scattering coefficients are in good accordance with those obtained from numerical simulation models.     

Simulation of Lamb wave reflections at plate edges using the semi-analytical finite element method

In typical Lamb wave simulation practices, effects of plate edge reflections are often not considered in order to simplify the wave signal interpretations. Methods that are based on infinite plates such as the semi-analytical finite element method is effective in simulating Lamb waves as it excludes the effect of plate edges. However, the inclusion of plate edges in a finite plate could render this method inapplicable, especially for transient response simulations. Here, by applying the ratio of Lamb mode reflections at plate edges, and representing the reflection at plate edges using infinite plate solutions, the semi-analytical finite element method can be applied for transient response simulation, even when the plate is no longer infinite.     

Genetic algorithm-support vector regression for high reliability SHM system based on FBG sensor network

Structural Health Monitoring (SHM) based on fiber Bragg grating (FBG) sensor network has attracted considerable attention in recent years. However, FBG sensor network is embedded or glued in the structure simply with series or parallel. In this case, if optic fiber sensors or fiber nodes fail, the fiber sensors cannot be sensed behind the failure point. Therefore, for improving the survivability of the FBG-based sensor system in the SHM, it is necessary to build high reliability FBG sensor network for the SHM engineering application. In this study, a model reconstruction soft computing recognition algorithm based on genetic algorithm-support vector regression (GA-SVR) is proposed to achieve the reliability of the FBG-based sensor system. Furthermore, an 8-point FBG sensor system is experimented in an aircraft wing box. The external loading damage position prediction is an important subject for SHM system; as an example, different failure modes are selected to demonstrate the SHM system's survivability of the FBG-based sensor network. Simultaneously, the results are compared with the non-reconstruct model based on GA-SVR in each failure mode. Results show that the proposed model reconstruction algorithm based on GA-SVR can still keep the predicting precision when partial sensors failure in the SHM system; thus a highly reliable sensor network for the SHM system is facilitated without introducing extra component and noise.     

一种增强LED光提取效率的新方法

本文从分析全内反射中的近场倏逝波出发,提出了在近场倏逝波衰减长度内置一金属Ag光栅的LED结构模型,同时基于时域有限差分(FDTD)方法计算了此模型的光谱特性,分析了此LED模型的光提取效率。结果表明置入的金属Ag光栅在特定的波段可以将近场倏逝波耦合为传播波模式辐射出去,从而有效地增强了LED的光提取效率。     

氢-空气绕流无限长斜劈斜爆震波数值模拟

采用二维多组分有化学反应的Euler方程,考虑单步化学反应,采用有限反应速率模型,对斜爆震波进行计算,通过将数值模拟结果与实验结果对比,验证了数值模拟方法的有效性。在此基础上,对氢空气绕流无限长斜劈的斜爆震过程进行了数值模拟,分析了斜劈角度对斜爆震波特性的影响。结果表明:当斜劈角度增大时,爆震波中的化学反应速率随之增大,相应的斜爆震波的角度也增加,波后的温度更高,同时波后法向马赫数减小。     

�첨���Ȼ����׵��Ż����

介绍了离子回旋波加热中天线的研究进展,讨论了传统环天线、相控双环天线及双臂单环天线激发波的频谱特征。使用射线轨迹方法对单通吸收率进行了数值计算,得到环向谱与单通吸收率的关系。由此验证了双臂单环天线有较好的耦合性能。该天线结构简单,能够改善加热性能。     

Electromagnetic wave absorption of polymeric nanocomposites based on ferrite with a spinel and hexagonal crystal structure

We have investigated composites designed for microwave absorption based on magnetic filler, composed of phases within the SrO-Fe₂O₃ system, embedded in a polyphenylene sulfide matrix with a concentration ratio of 80:20 by weight. The formation of the nanosized particles of SrFe₁₂O₁₉ and Fe₃O₄, as the principal magnetic phases was achieved via the co-precipitation of Sr²⁺/Fe³⁺ ions using different molar ratios. The various precursors obtained were calcined between 600 °C and 900 °C in air. The electromagnetic parameters of the composites were measured with a vector network analyzer at 400 MHz to 32 GHz. The results show that with a composite composed of a complex magnetic filler comprising the nanoparticles of two magnetically diverse phases, i.e., a spinel phase as the electromagnetic wave absorber in the lower GHz range and a hexagonal phase operating at a higher GHz range, above 32 GHz, a microwave absorber with an broad absorption range can be prepared.     

Physical properties and giant magnetoimpedance sensitivity of rapidly solidified magnetic microwires

The relation between the magnetoimpedance and the magnetic properties of a wide set of soft magnetic microwires from several sources has been studied. Magnetic properties were obtained by vibrating sample magnetometry and ferromagnetic resonance spectroscopy. The magnetoimpedance voltage sensitivity of each sample, the criterion of interest for high sensitivity magnetometer design, was then evaluated at several frequencies and drive currents. It appears that all samples possess roughly similar properties, regardless of their fabrication process or chemical composition. The voltage sensitivity of the samples obtained from experimental measurement is compared with a simple model of sensitivity. The general trends predicted by the model provide useful insights for materials optimization. Averaged sensitivity over the sample set is around 10 kV/T/cm at 10 MHz. The critical importance for sensitive magnetometry of the maximum excitation current permissible in each wire is also highlighted.